The front porch update is done. We covered the outdated wrought iron column with cedar lumber, adding that rustic ranch style.
For less than $200 !
Here is what my front porch column used to look like.
"G" used a grinder and cut off the metal railing. It is currently being re-fabricated to fit back in its original location. Plus getting a new coat of paint. The old column used to have the leaf and scroll work all through the inside of the column. I had "G" remove it but alas that was years ago, before I started blogging, so no pictures showing how truly ugly it was.
But I think you get the idea.
For the sake of not hiring an Architect or Structural Engineer we opted against removing the post completely as it does support the roof.
So for less than $170 in cedar 1" x 12" x 8' lumber?
We covered it. I would highly recommend this type of update if you're on a budget and cannot get an informed opinion on structural support.
"G" used screws that could tap into metal and secured each 1"x12" piece right into the metal column. Don't worry, once he adds the decorative trim, you won't see the screws.
I'd tell you the exact name of the screws he used, but alas I cannot find them.
Once done they probably went down into hubby's testosterone screw sanctuary, that only a man would know where to find them.
This DIY project took about 6 hours to complete.
Once we purchased the lumber, we had a decision to make. To "box out" the column, creating a 12" square, or follow the "L"" shape of the original column.
Since the width of the original metal column was 10-1/2" inches wide, we used 12" wide cedar. "G" cut the boards to fit and using clamps created the box. Upon seeing it, I knew that it did really dominate the cozy porch. Plus it did look too big for it.
So an "L" shape won that argument.
Using his air nailer, he stapled the outside edges of the boards for additional strength.
Then added decorating trim at both the top and bottom.
Now the question is:
To stain or not to stain. I am contemplating adding a dark brown stain and protective coat to preserve the wood and keep a nice rich brown color.
Plus also add it to the steps so they can go girly and color coordinate!
Next on the to do list is put the railing back and add two stair rails.
Then I need to get the flag back up. I am thinking of putting it where the house numbers are and relocating those to the mailbox.
This is how "G" spent some of his weekend, I on the on other hand spent it relocating a few plants, pulling weeds and doing what I love. I admit it was a long weekend for him. Saturday morning (early) we were at my sisters installing her kitchen cabinets.
I am loving how nice it turned out!
XO,
1 comment
This is wonderful! I had not thought of following the "L" of the iron instead of doing a square post. Do you have any pictures from the "house" side of the post to see how that is trimmed out? It looks really proportional they way it's done. Thanks for sharing your project.
Post a Comment